Roof: Composed of 16 mm water-repellent melamine coated plywood board, viewed from the inside to facilitate cleaning, and on the outside, 15 mm Scots pine plywood board, coated with waterproof asphalt blanket with a granulated top finish. And on the outside, 15 mm Scots pine plywood board, coated with waterproof asphalt blanket with a granulated top finish.Roof structure: Composed of 192×45 and 145×45 mm Scots pine wooden beams.Interior enclosure: Formed by laminated Scots pine pillars. The interior walls are made of 16 mm water-repellent melamine with high resistance to rubbing and finished on the floor with aluminium profiles.Exterior enclosure: Formed by Scots pine wood pillars. Scots pine imitation stave plywood panel, specially designed for façades with a thickness of 15 mm, placed on a structure of C18 wood strips, 70×45 and 90×45 section, with class IV impregnation.Floor: Plywood board with level IV impregnation and class III PVC coating, suitable for working areas with humidity and finished with a sanitary curve. Floor structure: Composed of 192×90 wooden floorboards in Scots pine, autoclave-treated risk IV and 145×45 mm battens to ensure the settlement of the module and its ventilation.

Structure: Made of top quality Scots pine wood, free of defects. Its construction is completed with laminated pine wood.non-slip board floor: Formed by plywood board with level IV salt impregnation and class III PVC coating, suitable for working areas with humidity and finished with a sanitary curve. interior lining: 16 mm water-repellent melamine with high resistance to rubbing and finished with an aluminium profile.roof: 16 mm water-repellent melamine with high resistance to rubbing and finished with an aluminium profile.Interior cladding: 16 mm water-repellent melamine with high resistance to rubbing and finished with an aluminium profile.Roof: Exterior waterproof cladding with 5 kg/m2 asphalt blanket on a roll with fibreglass, with a granulated top finish.Decorative protective varnish: Three coats of top-brand, long-lasting decorative protective finish. Incorporates UV ray protection and fungicide active ingredients.Electrical installation: Concealed, complete single-phase, with lighting, emergency lights and sockets in all rooms.Wood treatment risk 3: All components that are not in permanent contact with the floor will be treated in autoclave vacuum system with fungicide and insecticide properties.Treatment of wood risk 4: All components that are in permanent contact with the ground will be treated by vacuum autoclave system by immersion in a solution of water-soluble salts, free of chromium and arsenic guaranteed for a period of 15 years, against biological degradation agents.we have two impregnation plants so we can guarantee that all parts used are impregnated once they have their final dimensions.