This beach bar is made up of two modules. It has a wide variety of options and can be adapted to the specific requirements of each use.
That’s right…
The Lido beach bar
The module is made entirely of wood and is transported completely finished, with the electrical and plumbing installation in the toilets included.they are resistant to extreme weather conditions and are prepared to withstand vandalism.available in 16 and 20 square metresModules designed to offer, in the field of catering, the service of Bar and / or kitchen.the possible configurations for different uses are:
- Area dedicated exclusively to Bar: For this purpose, gates are placed around the entire perimeter of the module in order to facilitate public access from any side. The opening of the gates is configured according to the needs of the moment.
- Bar/Kitchen: The module is divided with a double partition wall to make the most of the surface area in two rooms, the Bar area completely open to the outside by means of doors and the Kitchen area with cladding.
- Bar/Store/Services: Half of the module is set aside for a bar area with the same characteristics as the Bar/Kitchen. The second half is shared with the warehouse or small kitchen and the toilets where we can choose the configuration of the same, between unisex toilets complying with accessibility regulations, or double cabins for men and women/disabled people.
The entire range is designed with a flat roof at the top, thus seeking a minimalist visual effect (no chimneys or air extractors are visible), thus avoiding large visual impacts on the beach.
Construction section
- Ceiling: Composed of 16 mm water-repellent melamine-coated plywood board, viewed from the inside to facilitate cleaning. And on the outside, 15 mm Scots pine plywood board, coated with asphalt blanket with a granulated top finish.
- Roof structure: Composed of 192×45 and 145×45 mm Scots pine wood beams.
- Bar: In 34 mm thick Scots pine laminated timber. Optional 25 45 mm thick.
- Interior enclosure: Formed by laminated Scots pine pillars. The interior walls are made of 16 mm water-repellent melamine with high resistance to rubbing and finished on the floor with aluminium profiles.
- Exterior enclosure: Formed by Scots pine wood pillars. Scots pine imitation stave plywood panel specially designed for façades with a thickness of 15 mm, placed on a structure of C18 wood strips, 70×45 and 90×45 section, with class IV impregnation.
- Floor: Plywood board with level IV impregnation and class III PVC coating, suitable for working areas with humidity.
- Floor structure: Made up of 192×90 beams in Scots pine wood, autoclave-treated risk IV and 145×45 mm battens to ensure the module is stable and ventilated.
BEACH TROTTERS
Multimedia gallery Lido
Technical characteristics
- Structure: Made of top quality Scots pine wood, free of defects. Its construction is completed with laminated pine wood.
- Non-slip board floor: Formed by plywood board with level IV salt impregnation and class III PVC coating, suitable for work areas with humidity and finished with a sanitary curve.
- Interior lining: 16 mm water-repellent melamine with high resistance to friction and finished with an aluminium profile.
- Roof: Exterior waterproof coating with 5 kg/m2 asphalt blanket in rolls with fibreglass, with a granulated top finish.
- Decorative protective varnish: Three coats of top-brand, long-lasting decorative protective finish. It incorporates UV ray protection and fungicide active ingredients.
- Electrical installation: Concealed, complete single-phase, with lighting, emergency lights and sockets in all rooms. Electrical panels prepared for adding new circuits.
- Wood treatment risk 4: All the components that are in permanent contact with the floor will be treated by means of a vacuum autoclave system by immersion in a solution of water-soluble salts, free of chrome and arsenic, guaranteed for a period of 15 years, against biological degradation agents. We have two impregnation plants so we can guarantee that all the pieces used are impregnated once they have their definitive dimensions.
- Thermal insulation parameters and roof: Insulation with 30 mm polyethylene panels (optional)
are you looking for a versatile and compact solution for your business on the beach or in tourist areas?
Manufactured from high quality materials and designed to withstand coastal conditions, the Ipanema combines durability with attractive aesthetics. Contact us today for detailed information and to find out how this innovative solution can drive your success.
