Toilets Bari

• Risk 3 and 4 wood treatmentThewood we use in our buildings is treated with class 3 and 4 salts in an autoclave to guarantee maximum durability and resistance to building humidity.
• Sustainable woodAllour products are made with wood from sustainable forests with PEFC certification. This helps to reduce our carbon footprint.
• Anti-vandalism and aestheticsPlumbingand electrical installations are embedded in the walls to improve aesthetics, reduce the risk of vandalism and facilitate cleaning.
• Customised finishes without sacrificing qualityAllmodels can be manufactured with customised finishes. We have a catalogue of standard finishes, but do not hesitate to request a made-to-measure finish if none of them meet your needs. We use products from leading brands, which are known to perform well over time, even in very aggressive marine environments.
• Ceiling: Composed of 16 mm water-repellent melamine coated plywood board, seen from the inside to facilitate cleaning. And on the outside, 15 mm Scots pine plywood board, coated with waterproof asphalt blanket with a granulated top finish.
• Roof structure: Composed of 192×45 and 145×45 mm Scots pine wood beams.
• Interior enclosure: Formed by laminated Scots pine pillars. The interior walls are made of 16 mm water-repellent melamine with high resistance to rubbing and finished on the floor with aluminium profiles.
• Exterior enclosure: Formed by Scots pine wood pillars. Scots pine imitation stave plywood panel, specially designed for façades with a thickness of 15 mm, placed on a structure of C18 wood strips, 70×45 and 90×45 section, with class IV impregnation.
• Floor: Plywood board with level IV impregnation and class III PVC coating, suitable for working areas with humidity and finished with a sanitary curve.
• Floor structure: Composed of 192×90 beams in Scots pine wood, autoclave-treated risk IV and 145×45 mm battens to ensure the settlement of the module and its aeration.

• Structure: Made of top quality Scots pine wood, free of defects. Its construction is completed with laminated pine wood.
• Non-slip board floor: Formed by plywood board with level IV salt impregnation and class III PVC coating, suitable for working areas with humidity and finished with a sanitary curve.
• Interior lining: 16 mm water-repellent melamine with high resistance to friction and finished with an aluminium profile.
• Roof: Exterior waterproof coating with 5 kg/m2 asphalt blanket in rolls with fibreglass, with a granulated top finish.
• Decorative protective varnish: Three coats of top-brand, long-lasting decorative protective finish. It incorporates UV ray protection and fungicide active ingredients.
• Electrical installation: Concealed, complete single-phase, with lighting, emergency lights and sockets in all rooms. Electrical panels prepared for adding new circuits.
• Wood treatment risk 3: All components not in permanent contact with the floor will be treated in autoclave vacuum system with fungicide and insecticide properties.
• Treatment of risk 4 wood: All components that are in permanent contact with the ground will be treated by vacuum autoclave system by immersion in a solution of water-soluble salts, free of chromium and arsenic, guaranteed for a period of 15 years, against biological degradation agents.

We have two impregnation plants so we can guarantee that all parts used are impregnated once they have their final dimensions.We offer many options and sizes for Toilets. Please contact us for the specific technical characteristics of our models.