Special toilet with two separate compartments
The Rhodes Toilet
The different modulations will allow us to adapt the installation to the number of uses that are expected to be necessary in each case. It is worth highlighting the transportable nature of the modules, which will allow us, in certain cases and in response to growing needs, to replace the old toilet with a larger one with minimum effort and without affecting the opening hours of the business already in operation. The first one houses the ladies and disabled department, adapted to the current accessibility regulations and including the equipment, and the second cabin is for men’s use. In this case, one use can be made in each department.
Construction section
- Floor structure: Composed of 192×90 wide beams in Scots pine wood, autoclave-treated risk IV and 145×45 mm battens to ensure the module is stable and ventilated.
- Floor: Plywood board with level IV impregnation and class III PVC coating, suitable for damp work areas and finished with a sanitary curve.
- Interior enclosure: Formed by laminated Scots pine pillars. The interior walls are made of 16 mm water-repellent melamine with high resistance to rubbing and finished on the floor with aluminium profiles.
- Exterior enclosure: Formed by Scots pine wood pillars. Scots pine imitation stave plywood panel, specially designed for façades with a thickness of 15 mm, placed on a structure of C18 wooden slats, 70×45 and 90×45 section, with class IV impregnation.
- Roof structure: Composed of 192×45 and 145×45 mm Scots pine wood beams.
- Ceiling: Composed of 16 mm water-repellent melamine coated plywood board, viewed from the inside to facilitate cleaning. And on the outside, 15 mm Scots pine plywood board, coated with waterproof asphalt blanket with a granulated top finish.
- Lante roof: Composed of 15 mm Scots pine plywood board, covered on the outside with asphalt blanket with a granulated top finish.
Multimedia gallery Toilets Rhodes
Technical characteristics
- Structure: Made of top quality Scots pine wood, free of defects. Its construction is completed with laminated pine wood.
- Non-slip board floor: Formed by plywood board with level IV salt impregnation and class III PVC coating, suitable for working areas with humidity and finished with a sanitary curve.
- Interior lining: 16 mm water-repellent melamine with high resistance to friction and finished with an aluminium profile.
- Roof: Exterior waterproof coating with 5 kg/m2 asphalt blanket in rolls with fibreglass, with a granulated top finish.
- Decorative protective varnish: Three coats of top-brand, long-lasting decorative protective finish. It incorporates UV ray protection and fungicide active ingredients.
- Electrical installation: Concealed, complete single-phase, with lighting, emergency lights and sockets in all rooms. Electrical panels prepared for adding new circuits.
- Wood treatment risk 3: All components not in permanent contact with the floor will be treated in autoclave vacuum system with fungicide and insecticide properties.
- Treatment of risk 4 wood: All components that are in permanent contact with the ground will be treated by vacuum autoclave system by immersion in a solution of water-soluble salts, free of chromium and arsenic, guaranteed for a period of 15 years, against biological degradation agents.
We have two impregnation plants so we can guarantee that all parts used are impregnated once they have their final dimensions.We offer many options and sizes for Toilets. Please contact us for the specific technical characteristics of our models.
are you looking for a versatile and compact solution for your business on the beach or in tourist areas?
Manufactured from high quality materials and designed to withstand coastal conditions, the Ipanema combines durability with attractive aesthetics. Contact us today for detailed information and to find out how this innovative solution can drive your success.
